Renesas TFP-100B Informazioni Techniche

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for future ref

VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or

iPrefaceThank you for purchasing this user system interface cable (HS7018EWN61H) for the Hitachi’soriginal microcomputer SH7018 series.The HS7018EWN61

iiContentsSection 1 Configuration...1Section 2 Environmental Con

1Section 1 ConfigurationCAUTIONUse an IC149-100-054-B51 socket (manufactured byYAMAICHI ELECTRONICS Co., Ltd.) for the TFP-100Bpackage IC socket on

2Table 1 lists the HS7018EWN61H components. Please make sure you have all of thesecomponents when unpacking.Table 1 HS7018EWN61H ComponentsNo. Compon

3Section 2 Environmental ConditionsMaintain the conditions in table 2 when using the emulator.Table 2 Environmental ConditionsItem SpecificationsTem

4Section 3 Product SpecificationsThe specifications of this product are shown in table 3.Table 3 Product SpecificationsItem SpecificationsTarget pro

5Section 4 User Interface SpecificationsThe user system interface cable incorporates a level conversion circuit supporting a low-voltagecircuit. Ac

6(3) AVcc, AVss, and AN7 to AN0Emulator User systemAVcc, AN7 to AN0Vss AVssFigure 5 User System Interface Circuit for AVcc, AVss, and AN7 to AN0(4)

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

7Note: 5Vcc, Uvcc, and Uvss represent Vcc and Vss on a user system. 5Vcc represents Vcc (5V) generated in the user system interface cable.

8Section 5 Notes on EmulationThis user system interface cable supports the SH7018F. The following settings must be made priorto emulation.5.1 Setti

9Section 6 Connection Procedures6.1 Connecting User System Interface Cable to Emulator StationWARNINGObserve the precautions listed below. Failure

10Figure 8 Connecting User System Interface Cable to Emulator Station

116.2 Connecting User System Interface Cable to User SystemWARNINGAlways switch OFF the user system and the emulatorproduct before the USER SYSTEM INT

126.2.3 Inserting Cable HeadCAUTIONCheck the location of pin 1 before inserting.If the IC socket is not connected properly, the power-supplypins will

13Fasten the user system interface cable head to the IC socket for a TFP-100B package on the usersystem with the four screws (M2.6 x 12 mm; with four

146.2.5 Fastening Cable BodyConnect the cable body to the cable head.Figure 10 Fastening Cable Body

156.3 Recommended Dimensions for User System Mount PadFigure 6 shows the recommended dimensions for the mount pad (footprint) for the user systemwith

166.4 Dimensions for User System Interface Cable HeadThe dimensions for the user system interface cable head are shown in figure 12.Figure 12 Dimens

Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.The semiconductor operati

176.5 Resulting Dimensions after Connecting User System Interface CableThe resulting dimensions, after connecting the user system interface cable head

18Section 7 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use a Philips-type screwdriver whose head

19Figure 14 Installing MCU to User System

20Section 8 Verifying Operation1. When using the E6000 emulator for the SH series, turn on the emulator according to theprocedures described in the

21Section 9 Notice1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cablehead before inserting the cable h

CautionsKeep safety first in your circuit designs!1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better

SH7018 Series TFP-100BUser System Interface Cable (HS7018EWN61H) for E6000 EmulatorUser’s ManualUser’s Manual Rev.1.0 2002.07

Cautions1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’spatent, copyright, trademark, or other intellec

IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for f

IILIMITED WARRANTY Hitachi warrants its user system interface cables to be manufacturedin accordance with published specifications and free from d

IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t