Renesas User System Interface Cable HS2633ECH61H Informazioni Techniche Scaricare il pdf (Pagina 28)

Section 5 Notice

1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable head

before inserting the cable head into the user system IC socket.

2. The dimensions of the recommended mount pad for the user system IC socket are different from

those of the MCU.

3. This user system interface cable is specifically designed for the HS2633EPI61H emulator. Do

not use this cable with any other emulator station.

4. To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on the

user system interface cable.

5. While the emulator station is connected to the user system with the user system interface cable,

force must not be applied to the cable head. Place the emulator station, user system interface

cable, and user system as shown in the example in figure 11.

Figure 11 User System Interface Cable Location Example

6. The P1 jumper socket is used for testing. Do not remove the inserted jumper pin.

Figure 12 P1 Jumper Socket

1 2 ... 23 24 25 26 27 28 29 30

Nessun commento

Renesas User System Interface Cable HS2633ECH61H Informazioni Techniche Pagina 28