Renesas User System Interface Board HS7047ECH61H Manuale Utente

2004.1.29 SH7047 Group FP-100M User System Interface Board HS7047ECH61H User’s Manual Renesas Microcomputer Development Environment System S

1Section 1 ConfigurationFigure 1 and table 1 show the configuration and components of the user system interface board forthe FP-100M package. Pleas

2CAUTIONUse an IC149-100-054-B51 socket (manufactured byYAMAICHI ELECTRONICS Co., Ltd.) for the FP-100M packageIC socket on the user system.Table 1 HS

3Section 2 Connection Procedures2.1 Connecting User System Interface Board to User SystemWARNINGAlways switch OFF the user system and the emulatorpr

42.1.2 Installing Cable HeadCAUTIONCheck the location of pin 1 before inserting.Align pin 1 on the IC socket for an FP-100M package on the user system

5Screws (M2.6 x 12 mm) with flat washersPin 1BoardIC socket (IC149-100-054-B51 manufactured by YAMAICHI ELECTRONICS Co., Ltd.)User systemFigure 2 Co

62.2 Connecting User System Interface Board to EV-Chip BoardWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD

7Connector No.UCN1 UCN1UCN2 UCN2BoardEV-Chip Board Connector No.Board Connector No.EV-chip boardSpacerUser systemFigure 3 Connecting User System Int

82.3 Recommended Dimensions for User System Mount Pad (Footprint)Figure 4 shows the recommended dimensions for the mount pad (footprint) for the user

92.4 Dimensions for EV-Chip Board and User System Interface BoardThe dimensions for the EV-chip board and the user system interface board are shown in

102.5 Resulting Dimensions after Connecting User System Interface BoardThe resulting dimensions, after connecting the user system interface board to t

CautionsKeep safety first in your circuit designs!1. Renesas Technology Corp. puts the maximum effort into making semiconductor productsbetter and mor

11Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use a Philips-type screwdriver whose head

12MCU (SH7047)Screws (M2.6 x 6 mm) with flat washersSocket coverPin 1User systemIC socket (IC149-100-054-B51manufactured by YAMAICHI ELECTRONICS Co.,

13Section 4 Verifying Operation1. Turn on the emulator according to the procedures described in the SH7046 E6000H EmulatorUser's Manual (HS7046

14 To use the crystal oscillator mounted on the EV-chip boardInstall a crystal oscillator into the crystal oscillator terminals on the EV-chip board

15Section 5 Notice1. Before connecting any parts or cables, make sure that pin 1 on the both sides are correctlyaligned.2. Do not apply excessive fo

SH7047 Group FP-100MUser System Interface Board HS7047ECH61H User's ManualPublication Date: Rev.4.00, Januar

SH7047 Group FP-100M User System Interface Board HS7047ECH61H User’s Manual REJ10B0039-0400H

IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface board.• KEEP the user's manual handy for f

IILIMITED WARRANTY Renesas warrants its user system interface boards to be manufacturedin accordance with published specifications and free from d

IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t

IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface board.• KEEP the user's manual handy for future ref

VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or

iPrefaceThe HS7047ECH61H is a user system interface board that connects a user system for the SH7047FP-100M package to the SH7046 E6000H emulator (HS7

iiContentsSection 1 Configuration.....................1Section 2 Connection Proced