Renesas R0E572860CFL00 Manuale Utente

Revision Date: Jan. 09, 2008Renesas Microcomputer Development Environment SystemSuperH™ Family / SH7280 Series Rev.1.00 SH7286 Group PLQP0

VI means WARNING or CAUTION. Example: CAUTION AGAINST AN ELECTRIC SHOCK means PROHIBITION. Example: DISASSEMBLY PROHIBITED means A FORCIBLE ACTI

VII WARNING Warnings for AC Power Supply: • If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do no

VIII WARNING • If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect power immediately by unp

IX CAUTION Cautions for AC Adapter: • Use only the AC adapter included in this product package. • The included AC adapter is for this emulator. D

X WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emul

i Preface The R0E572860CFL00 is a user system interface board that connects a user system for the SH7286 PLQP0176LB-A (former package: FP-176AV) pack

ii Contents Section 1 Configuration... 1 Section 2 Environment

1 Section 1 Configuration Figure 1 and table 1 show the external appearance and components, respectively, of the user system interface board for th

2 CAUTION Use a NQPACK176SE socket (manufactured by Tokyo Eletech Corporation) and a HQPACK176SE (manufactured by Tokyo Eletech Corporation) for

3 Section 2 Environmental Conditions Maintain the conditions in table 2 when using the emulator. Table 2 Environmental Conditions Item Specificati

4 Section 3 Connection Procedures 3.1 Connecting User System Interface Board to User System WARNING Always switch OFF the user system and the

5 3.1.2 Installing Cable Head CAUTION Check the location of pin 1 before inserting. Align pin 1 on the IC socket for a PLQP0176LB-A package on t

6 Fasten the user system interface board to the IC socket for a PLQP0176LB-A package on the user system with the four screws (M2.0 x 10 mm) provided.

7 3.2 Connecting User System Interface Board to EV-Chip Board WARNING Observe the precautions listed below. Failure to do so will result in

8 BoardSpacerUser systemEV-chip unitConnector No.User I/F Connector 1(CN4)EV-Chip Unit Connector No.Board Connector No.UCN1UCN2User I/F Connector 2(C

9 3.3 Recommended Dimensions for User System Mount Pad (Footprint) Figure 4 shows the recommended dimensions for the mount pad (footprint) for the u

10 Up to 1.21.3 to 2.02.1 to 5.05.1 to 1010.1 or above 7 0.4 0.2 7 Pin 12219.123.13-Ø1.0Ø2.2(SL-type) 0.4 × 43 =17.2 Dimension and t

11 3.4 Dimensions for External Bus Trace Unit, Emulation Memory Unit, EV-Chip Unit, and User System Interface Board The dimensions for the external

12 125.090.090.045.05.0125.090.0110.020.030.060.05.0125.090.0Unit: mmTolerance: ±0.5 mmExternal bus trace unitBoardSpacerEV-chip unitPin 1Emulation m

13 3.5 Resulting Dimensions after Connecting User System Interface Board The resulting dimensions, after connecting the user system interface board

1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use

14 24.542.112.555.5IC socket(NQPACK176SE manufactured by User systemSpacer (φ6.0)30.037.527.529.2Unit: mm24.539.1939.1924.5Pin 1Top viewExternal bus

15 24.529.212.542.6IC socket(NQPACK176SE manufactured by Tokyo Eletech Corporation)User systemSpacer (φ6.0)EV-chip unit30.037.527.5Unit: mmTolerance

16 Section 4 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use a Philips-type screwdriver

17 User systemIC socket (NQPACK176SE manufactured by Tokyo Eletech Corporation)Screws (M2.0 x 6 mm)Socket coverMCU (SH7286)Pin 1 Figure 9 Installin

18 Section 5 Verifying Operation 1. Turn on the emulator according to the procedures described in the SH-2A, SH-2 E200F Emulator User's Manua

19 Section 6 Notice 1. Before connecting any parts or cables, make sure that pin 1 on the both sides are correctly aligned. 2. Do not apply exces

20

SH7286 Group PLQP0176LB-A User System Interface BoardUser's Manual Publication Date: Rev. 1.00, January 9, 2008

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japanhttp://www.renesas.comRefer to

SH7286 Group PLQP0176LB-A User System Interface Board User’s Manual

I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future

II Target User of the Emulator Product: This emulator product should only be used by those who have carefully read and thoroughly understood th

III LIMITED WARRANTY Renesas warrants its emulator products to be manufactured in accordance with published specifications and free from d

IV State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages,

V SAFETY PAGE READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference.